Rorke Data The Galaxy 65 Spezifikationen PDF herunterladen (Seite 62)

Galaxy GHDX-2422S-8+12F4D Installation and Hardware Reference Manual

Power On

4-6

4.2 Power On

Once all the components have been installed in the Galaxy subsystem, the host channels

have been connected to the host, power on the FC networking devices (e.g., FC switches),

the subsystem, and then power on the host computer(s).

4.2.1 Check List

BEFORE powering on the Galaxy subsystem, please check the following:

 Memory Modules – Memory modules have been correctly installed on the

controller boards.

 BBU Modules – If used, that the BBU modules have been installed correctly.

 Hard Drives – Hard drives have been correctly installed on the drive trays.

 Drive Trays – ALL the drive trays, whether or not they have a hard drive, have

been installed into the subsystem.

 Cable Connections – The host ports on the subsystem have been correctly

connected to a host computer.

 Power Cables – The power cables have been connected to the PSU modules on

the subsystem and plugged into main power.

 Ambient Temperature – All the subsystem components have been acclimated to

the surrounding temperature.

4.2.2 Power On Procedure

When powering on the Galaxy subsystem, please follow these steps.

1. Power on the Fibre Channel networking devices.

These devices include the FC switches, and any other such device that have been

connected to the subsystem. Please refer to the documentation that came with your

FC devices to see the power on procedure.

2. Power on the subsystem.

The subsystem should only be powered on after all the Fibre Channel connection

devices have been powered on first. The subsystem power on procedure is described

below.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 99 100

Keine Kommentare

Rorke Data The Galaxy 65 Spezifikationen Seite 62