Rorke Data The Galaxy 65 Spezifikationen Seite 104

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 124
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 103
Chapter 5: Configuration Parameters
Drive-side Parameters 5-19
Device Type
Setting
Enclosure Service Device
0xd
No Device Present
0x7f
Direct-access Device
0
Sequential-access Device
1
Processor Type
3
CD-ROM Device
5
Scanner Device
6
MO Device
7
Storage Array Controller Device
0xC
Unknown Device
0x1f
Table 5-2: Peripheral Device Type Settings
5.11 Drive-side Parameters
1. Disk Access Delay Time(sec):
This feature sets the delay time before firmware tries to
access the hard drives after power-on. Default is 15 seconds.
2. Drive I/O Timeout(sec):
The Drive I/O Timeout is the time interval for firmware to wait
for a drive to respond. When the drive itself detects a media
error while reading from the drive platter, it usually retries the
previous read or re-calibrates the head. When the drive
encounters a bad block on the media, it reassigns the bad
block onto a spare block. However, it takes time to perform
the above procedure. The time to perform such procedure
can vary between drives of different brands and models.
The default setting for I/O timeout is 7 seconds. It is
recommended to keep the default.
3. Maximum Tag Count:
Seitenansicht 103
1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 123 124

Kommentare zu diesen Handbüchern

Keine Kommentare